Quick Answer: Why Is My ATT Uverse WIFI Not Working?

How do I reset my AT&T Wireless Router?

With gateway settingsGo to your gateway settings.Select Settings, then Diagnostics, and then Resets.Enter your Device Access Code (you can find this on the side of your gateway).Select Submit.Choose Reset next to Reboot Outdoor Antenna or Reboot System (gateway)..

How do you reset your WiFi?

To reboot your modem and your WiFi router:Unplug the power cord from the back of the modem and remove any batteries.Unplug the power cord from the WiFi router.Wait 60 seconds, and then reinsert any batteries and reconnect power to the modem.Wait at least two minutes to allow the modem to power up.More items…

Why is my home WiFi not working?

On Android devices, check your settings to make sure the device’s airplane mode is off and that Wi-Fi is on. 3. Another network adapter related issue for computers could be that your network adapter driver is out of date. Essentially, computer drivers are pieces of software telling your computer hardware how to work.

Why is my broadband not working?

Then check that the Ethernet cables are connected. Restart the Openreach modem by disconnecting/connecting the power cable. Wireless connections are like your mobile signal. … If you can it’s a really good idea to try connecting via an Ethernet cable to see if you still have a lost broadband connection.

What lights should be on my ATT router?

The power status lights on your Wi-Fi® gateway indicate: Green: The gateway is powered on. Flashing green: The gateway is starting. Amber: There’s a software update in progress.

What is the WPS button on ATT router?

Go to the WAP and press the Wi-Fi Protected Setup (WPS) button on the front of the unit. You should see a fast-blinking green LED bar under the WPS button. Go back to the TV and TV Receiver.

What does the WPS button do?

Wi-Fi Protected Setup (WPS) is a feature supplied with many routers. It is designed to make the process of connecting to a secure wireless network from a computer or other device easier. NOTE: Some manufactures may use the following terms instead of WPS (Push Button) to describe this function.

How do I fix my wifi connection?

Step 1: Check settings & restartMake sure Wi-Fi is on. Then turn it off and on again to reconnect. Learn how to connect to Wi-Fi networks.Make sure Airplane mode is off. Then turn it on and off again to reconnect. … Press your phone’s power button for a few seconds. Then, on your screen, tap Restart .

Why is my internet not working AT&T?

If you are having problems with your AT&T High Speed Internet connection, try the following troubleshooting steps: Check the modem status icon on the task bar on your desktop. Check all connections. … Make sure that your DSL modem is not plugged into a surge protector.

Why is my AT&T modem not working?

Make sure your line filters are installed correctly and aren’t defective. Turn the modem on and off. Check your modem light indicators. If your Power light doesn’t light up when the modem is plugged in or turned on, the modem may not be getting power.

How do I test my ATT modem?

Launch the AT&T recommended speed test site at att.com/speedtestEnter your AT&T e-mail address to help us improve our service (optional)Click the START TEST button.Allow 30-60 seconds for your test results.Review the Download and Upload speed then compare it to your subscribed speed.More items…•

How do I troubleshoot my AT&T router?

Restart your gateway or modem manuallyUnplug the power cord from the back of your gateway or modem.Wait 20 seconds.Put the internal battery back in, if you have one.Plug the power cord back in. … Wait up to 10 minutes for the gateway or modem to restart and your Broadband light to turn solid green.

How do I fix my AT&T U verse WIFI?

Get help with your internetUnplug the power cord from the back of your gateway or modem. If you have: … Wait 20 seconds.Put the internal battery back in, if applicable.Plug the power cord back in. … Wait up to 10 minutes for the gateway or modem to reboot and your Broadband light to turn solid green.

Why is my DSL Internet not working?

Make sure that the DSL modem’s phone line is properly connected to a wall telephone jack. Also make sure that the telephone line connected to the modem is not plugged into an extension. … Try plugging the modem into another telephone jack. The DSL modem can get a signal even if no computer is connected to it.

How do I know if my broadband is working?

How to Test Broadband Internet ConnectionPower source: Confirm that you have power — when the power goes out, the Internet goes out.Other signals: If you’re using cable Internet access, for example, check the cable TV. … Modem lights: Broadband modems feature lights that do more than just look impressive. … First, check the power light.More items…

How do I fix my AT&T Red broadband light?

If you see Blinking or Solid Red Broadband light, try resetting the modem and checking cables: Restart Gateway : Unplug the power connection behind the gateway for ~15 seconds. Plug back in and wait for the broadband light to go green, this can take 2-5 minutes.

How often should I reboot my WiFi router?

“In general, it’s a great idea to reboot the main Internet router every couple of months. A router reboot can fix certain Internet connectivity issues, from no Internet connectivity to slow wireless connections, and should be one of your first troubleshooting steps in a home or consumer environment.

What happens if you unplug your WiFi router?

Totally disconnecting a router from power could cause it to reset, which means the next time it is re-connected and turned on, it will need to be set up again. The best way to protect a router from malicious software is not to turn it off when it is not in use, but to secure it with a strong password.